Ultrasonic Sensor – ToughSonic REMOTE 50

ultrasonic liquid level sensor ToughSonic remote 50

Maximum Range 50 feet (15.2 Meters)

The ToughSonic REMOTE 50 is a remote liquid level sensor with a maximum range of 50 feet (15.2 meters). This digital sensor is designed for accuracyUltrasonic sensor stainless steel housing and long-term durability in remote monitoring applications. With a stainless steel housing, full epoxy potting and IP68 rating, it operates in the harshest climates. It comes equipped with Senix Lightning Guard, a system that protects both power and communications circuits from repeated electrical transients of up to 7 kilovolts.  The ToughSonic REMOTE 50 uses up to 20% less energy than the ToughSonic 50. It is fully configurable with SenixVIEW software. This sensor is mounted on bridges, piers and tanks all over the world in mission-critical remote level monitoring applications.

ToughSonic REMOTE 50 Options

Housing

The ToughSonic 50 is available in three different housings. All sensor features are available with any housing.

Standard (Starting at $925 USD)

Our Standard Model (U50) comes in a 2.1 inch (53.34 millimeter) smooth 316 stainless steel housing for easy clamping.

Rear Mount (Starting at $1049 USD)

The Rear Mount Model (U50R) adds a stainless steel end cap with 1.5 inch NPT threading to the 2.1 inch smooth standard housing.

PVC Model (Starting at $849 USD)

The PVC Model (U50P) is packaged in a 2.5 inch PVC housing with 2.5 inch NPT threading on either end for tank level applications.

Serial Interface

The ToughSonic REMOTE 50 is available with one of the following Modbus serial data interfaces.

RS-232
Modbus RS-232 serial data interface
RS-485
Modbus RS-485 serial data interface

Sensor Customization

  • Custom SenixVIEW configurations can be pre-loaded.
  • Alternative housings, cable type, length and connections are available

Our ToughSonic ultrasonic sensors offer extraordinary features and flexibility. If you need sensor capabilities that are not listed here, please contact us. We’ve been designing ultrasonic sensors since 1990. We can develop a sensor solution for you. Email: Customer.Service@Senix.com. Phone: +1 802 489 7300.

Tough:

ToughSonic ultrasonic sensors are built Tough with:

  • Type 316 stainless steel housing.
  • Sealed epoxy potting for wet and dirty applications.
  • Ruggedized piezoelectric ultrasonic transducer, potted in place.
  • Surge protection 75% stronger than IEC-61000-4-5.
  • UV resistant, potted-in, 4-wire cable.

Smart:

ToughSonic ultrasonic sensors are built Smart with:

  • SenixVIEW configuration and analysis software controls more than 60 performance parameters and dozens of viewing, analysis and maintenance options.
  • Addressable Modbus RTU.
  • ASCII or phased high-speed, multi-sensor data collection for special applications.

Specifications

Maximum Range50 feet (15.2 meters)
Optimum Range1 foot - 33 feet (30.5 centimeters - 10 meters)
Temperature-40° to 158° F (-40° to 70° C)
Humidity0 to 100% operating
ProtectionNEMA-4X, NEMA-6P, IP68
TransducerRuggedized piezoelectric
CompensationTemperature compensated
ResolutionDigital: 0.0135 in. (0.344 mm)
RepeatabilityNominal 0.2% of range @ constant temp. Affected by target, distance, environment
Update Rate5 Hz (200 ms), SenixVIEW adjustable; affected by SenixVIEW filter selections

Specifications are subject to change without notice.

Ultrasonic sensor mechanical drawing ToughSonic REMOTE 50

ToughSonic REMOTE 50 

Serial Data Interface

InterfaceRS-232 or RS-485 (by model)
Baud Rate9600, adjustable to 115200
Format8 data bits, 1 stop bit, no parity
ProtocolsAddressable Modbus RTU (default) ASCII Streaming (single sensor) Extended protocols for custom applications
Measure OptionsContinuous measure (rate adjustable) Measure on poll

Mechanical

Mounting2.3 inch clamp
Attached Cable6.5 feet (2 meters)
Total Weight25.9 oz. (0.73 kg)

Accessories

Articles and News