The ToughSonic REMOTE 30 is a remote liquid level sensor with a maximum measurement range of 30 feet (9.1 meters). This digital sensor is designed for accuracy and long-term durability in remote monitoring applications. With a stainless steel housing, full epoxy potting and NEMA-6P and IP68 ratings, it operates in the harshest climates. It comes equipped with Senix Lightening Guard, a system that protects both power and communications circuits from repeated electrical transients of up to 7 kilovolts. The ToughSonic REMOTE 30 uses up to 20% less energy than the ToughSonic 30. It is fully configurable using SenixVIEW software. This sensor is mounted on bridges, piers and tanks all over the world in critical remote level monitoring applications.
ToughSonic REMOTE 30 Options
The ToughSonic REMOTE 30 is available with one of the following Modbus serial data interfaces.
Modbus RS-232 serial data interface
Modbus RS-485 serial data interface
- Custom SenixVIEW configurations can be pre-loaded.
- Alternative cable type, length and connections are available
Our ToughSonic ultrasonic sensors offer extraordinary features and flexibility. If you need specific sensor capabilities for your irrigation management, flood monitoring or other integrated liquid level system, please contact us. We can develop a sensor solution for you. Email: Customer.Service@Senix.com. Phone: +1 802 489 7300.
ToughSonic ultrasonic sensors are built Tough with:
- Type 316 stainless steel housing.
- Sealed epoxy potting for immersion protection.
- Ruggedized piezoelectric ultrasonic transducer.
- 75% better surge protection than IEC 61000-4-5.
- UV resistant, potted-in, 4-wire cable.
ToughSonic ultrasonic sensors are built Smart with:
- SenixVIEW configuration and analysis software controls more than 60 performance parameters and dozens of viewing, analysis and maintenance options.
- Addressable Modbus RTU.
- ASCII or phased high-speed, multi-sensor data collection for special applications.
|Maximum Range||30 feet (9.1 meters)|
|Optimum Range||10 inches - 20 feet (25.4 cm- 6.1m)|
|Temperature||-40° to 158° F (-40° to 70° C)|
|Humidity||0 to 100% operating|
|Protection||NEMA-4X, NEMA-6P, IP68|
|Resolution||Digital: 0.0068 in. (0.172 mm)|
|Repeatability||Nominal 0.2% of range @ constant temp. Affected by target, distance, environment|
|Update Rate||10 Hz (100 ms), SenixVIEW adjustable; affected by SenixVIEW filter selections|
Sensor specifications are subject to change without notice.
Serial Data Interface
|Interface||RS-232 or RS-485 (by model)|
|Baud Rate||9600, adjustable to 115200|
|Format||8 data bits, 1 stop bit, no parity|
|Protocols||Addressable Modbus RTU (default) ASCII Streaming (single sensor) Extended protocols for custom applications|
|Measure Options||Continuous measure (rate adjustable) Measure on poll|
|Mounting||1.5 inch NPT thread, top and bottom|
|Attached Cable||6.5 feet (2 meters)|
|Total Weight||22.6 oz. (0.64 kg)|