Ultrasonic Sensor – ToughSonic REMOTE 14

water level ultrasonic sensor for remote monitoring - toughsonic remote 14

Maximum Range 14 feet (4.3 Meters)

The ToughSonic REMOTE 14 is a remote water level sensor with a maximum range of 14 feet (4.3 meters).  This digital sensor is designed for accuracy and long-termultrasonic liquid level sensors in stainless steel durability in remote monitoring applications.  With a stainless steel housing, full epoxy potting and IP68 rating, it withstands the most demanding environmental conditions.  It uses up to 21 percent less energy in solar and battery-powered applications.  It also includes Senix Lightening Guard,with protection for electrical transients up to 7Kv on both power and communication circuits.   The ToughSonic REMOTE 14 is fully configurable using SenixVIEW software.  The ToughSonic REMOTE family of sensors are specified by some of the largest and most sophisticated irrigation, flood management and remote monitoring organizations in the world.

ToughSonic REMOTE 14 Options

Serial Interface

The ToughSonic REMOTE 14 is available with one of the following Modbus serial data interfaces.

RS-232
Modbus RS-232 serial data interface
RS-485
Modbus RS-485 serial data interface

Sensor Customization

  • Custom SenixVIEW configurations can be pre-loaded.
  • Alternative cable type, length and connections are available.

Our ToughSonic ultrasonic sensors offer extraordinary features and flexibility. If you need specific capabilities for your irrigation management, flood monitoring or other integrated liquid level system, please contact us. We can develop a sensor solution for you. Email: Customer.Service@Senix.com. Phone: +1 802 489 7300.

Tough:

ToughSonic ultrasonic sensors are built Tough with:

  • Type 316 stainless steel housing.
  • Sealed epoxy potting for immersion protection.
  • Rugged piezoelectric ultrasonic transducer.
  • 75% better surge protection than IEC 61000-4-5
  • Hardened internal electronics.
  • UV resistant, potted-in cable.

Smart:

ToughSonic ultrasonic sensors are built Smart with:

  • SenixVIEW configuration and analysis software controlling more than 60 performance parameters, and dozens of viewing, analysis and maintenance options.
  • Addressable Modbus RTU
  • ASCII or phased high-speed, multi-sensor data collection for special applications.

Specifications

Maximum Range14 feet (4.3 meters)
Optimum Range4 inches - 10 feet (102 millimeters - 3 meters)
Temperature-40° to 158° F (-40° to 70° C)
Humidity0 to 100% operating
ProtectionNEMA-4X, NEMA-6P, IP68
TransducerRuggedized piezoelectric
CompensationTemperature compensated
ResolutionDigital: 0.0034 inches (0.086 millimeters)
RepeatabilityNominal 0.2% of range @ constant temp. Affected by target, distance, environment
Update Rate20 Hz (50 ms), SenixVIEW adjustable; also affected by SenixVIEW filter selections

Specifications are subject to change without notice.

ultrasonic liquid level sensor mechanical drawing - toughsonic remote 14

Serial Data Interface

InterfaceRS-232 or RS-485 (by model)
Baud Rate9600, adjustable to 115200
Format8 data bits, 1 stop bit, no parity
ProtocolsAddressable Modbus RTU (default) ASCII Streaming (single sensor) Extended protocols for custom applications
Measure OptionsContinuous measure (rate adjustable) Measure on Poll

Mechanical

MountingM30X1.5 thread
Attached CablePUR, 6.5 feet (2 meters)
Total Weight10.4 ounces (0.29 kilograms)
Housing316 Stainless Steel

Accessories

Articles and News