Ultrasonic liquid level sensors designed for remote monitoring

ToughSonic REMOTE liquid level sensors are designed for accuracy and durability in remote monitoring applications. They include the same 316 stainless steel housings, full epoxy potting, UV resistant cables and rugged piezoelectric transducers as our ToughSonic sensors, but with enhanced lightning resistance and reduced energy consumption. These digital ultrasonic sensors are designed for years of trouble free operation in harsh outdoor environments.





Maximum Range	14 ft (4.3 m)	30 ft (9.1 m)	50 ft (15.2 m)

Optimum Range	4 in – 10 ft (102 mm – 3 m)	10 in – 20 ft (25.4 cm – 6.1 m)	12 in – 33 ft (30.5 cm – 10 m)

Size	1.05 x 4.062 in (26.7 x 103.2)	1.88 x 4.3 in (48 x 109 mm)	2.3 x 4.8 in (59 x 122 mm)

Mounting	30 mm threaded	1.5 in NPT threaded ends.	2.3 inch clamp

Outputs	Serial data (RS-232 or RS-485) MODBUS or ASCII streaming protocols	Serial data (RS-232 or RS-485) MODBUS or ASCII streaming protocols	Serial data (RS-232 or RS-485) MODBUS or ASCII streaming protocols

Cable, 6.5 feet (2 Meters)	4-wire data cable	4-wire data cable	4-wire data cable


	Learn More	Learn More	Learn More

ToughSonic REMOTE sensors were developed specifically for remote monitoring systems. Whether measuring channel level in an irrigation management system, river level in a flood warning system or tank level on a remote drilling site, remote sensors require an extra measure of efficiency and reliability. ToughSonic REMOTE sensors are IP68 and NEMA 6X rated and include Senix Lightning Guard protection against repeated 7Kv electrical transients They are fully configurable with SenixVIEW sensor configuration and analysis software. That’s why they are installed in some of the largest and most sophisticated remote liquid level monitoring systems in the world.

Customization Options Available:

Pre-loaded parameter configuration and calibration for volume applications.
Alternative cables, lengths and connectors.

If you are not sure which ToughSonic ultrasonic sensor is right for you, please contact us to discuss your requirements. We’ve been helping customers with their automation challenges since 1990. We’ll be happy to help you. Email: Customer.Service@Senix.com. Phone +1 802 489 7300.

We use the sensors to measure water during the summer, ice and snow during the winter. They have been working very well. The waterproof SS case you put it in is a major plus during extreme weather events. Love the PC feature.

National Oceanographic and Atmospheric Administration

Once installed, these [remote stream] gauges are practically 100% maintenance free. We have always had a strong relationship with Senix.

Iowa Flood Center

Senix sensors have worked flawlessly since they were installed more than 10 years ago.

University of Vermont Proctor Maple Research Center

The sensors work like new even after three years of training races in harsh ocean conditions. They have worked perfectly since the very first day. We have never had to touch them.

Oracle Team USA

We have been very impressed with ToughSonic ultrasonic sensors that we purchased a year ago. They are extremely well built and robust, are easy to mount and use, and provide exceptional accuracy. The product has quickly earned our trust and it is our go-to product for level control in industrial applications.

Saskatchewan Research Council

[I] appreciate the very professional way you handled my tiny order. Hope this is a good start of a long-term cooperation.

Elbit Systems Ltd.

Compared to a lower cost alternative that I’ve tried, ToughSonic sensors are a much better value. Time savings due to ease of use and helpful tech support offset the higher cost.

Ira Leifer, Bubbleology Research Int'l http://bubbleology.com/

Your team is by far one of the best suppliers we’ve had the pleasure to deal with.

Mick Hehir, Murray Irrigation http://www.murrayirrigation.com.au/

The sensor is working well and I am delighted with its performance. Senix sensors and software are quality engineered products.

David Bills-Thompson, Port Fairy Coastal Group https://www.pfcg.org.au/

That’s tremendous support – very much appreciated! You have no idea how wonderful it is to get such efficient feedback…..and you went to trouble to – again, thank you kindly.

National University of Ireland, Galway http://www.nuigalway.iel

Summary Specifications
Input Power	10-30 VDC, typical 24 VDC
Environmental	Temp -40 to 70C, humidity 0-100% operating, chemically resistant
Repeatability	Nominal 0.2% of range at constant temperature
Housing	Type 316 stainless steel, potted and sealed, liquid tight
Protection	IP68, NEMA-4x, NEMA-6P
Compliance
Serial Interface (standard)	Multi-function: SenixVIEW software configuration, external controller communications, multi-drop networking (RS-485 models)
SenixView enhanced capabilities	Adjustment: Over 60 functionally organized sensor parameters Viewing: Large and small displays, chart, filtered & unfiltered Analysis: Measure statistics; log and replay data, view in Excel Maintenance: Store and retrieve setups, describe setups

Remote Liquid Level Sensors

Customization Options Available:

What our customers say...

Summary Specifications

ToughSonic REMOTE sensors are designed to last in demanding, remote applications.

Articles and News

Success, you will receive an email with a link to the white-paper soon.