ToughSonic CHEM 10 Level Sensor

Maximum Range 10 Feet (3 Meters)

ToughSonic CHEM 10 Level Sensor Features

Non-contact level measurement
Rugged construction, IP68 rated
Indoor or outdoor uses
Top and bottom mounting threads
Five outputs plus serial data
Serial data-only models
Temperature compensation
PC configurable

ToughSonic CHEM 10 Level Sensor Best Applications

Chemical tank levels
Benign liquid tank levels
Tanks up to 10-ft (3 m) tall
1.5 in NPT bottom thread, 1.0 in. parallel top thread

ToughSonic CHEM 10 Level Sensor

Get a Quote Today.

Request a Quote

Open Channel Flow

Chemicals

Chemicals ToughSonic CHEM 35 Level Sensor

Tank Level

Tough. by Design

The ToughSonic name says it all:

Injection molded PVDF (Kynar®) for superior chemical resistance
Ruggedized piezoelectric ultrasonic transducer, potted in place
Hardened & protected solid state electronics
UV resistant, potted-in, PUR-jacketed cable
All epoxy-potted for wet or dirty applications
Short and overload protected outputs
IP68 ingress rating (submersible) ∗

Injection molded PVDF (Kynar) for superior chemical resistance

Kynar® is a registered tradename of Arkema Corporation
∗ Measurement is unreliable when submersed

Sensors can be assembled with custom cables or connectors. Serial data-only models are available for remote monitoring and other serial data-only applications.

Smart. Engineering

ToughSonic sensors have the smarts to:

easily connect with your equipment
includes both analog and switch outputs
communicates by serial data
optimize the sensor to the application
create stand-alone functions
duplicate applications without re-calibration

Senix invented PC-configurable “smart sensors” in 1990 and has improved them ever since, giving you get the benefits of years of continuous improvement!

Ready out of the box but fully adjustable with SenixVIEW software (included)
Connect to a PC serial port or use our USB setup kit
Wiring and mounting accessories available

Flexible. Outputs

connect to:

PLCs, motor drives, displays, PCs – you name it!
Universal: one sensor = many applications
5 simultaneous industry standard outputs that are configured using SenixVIEW software
Analogs: 0-10 VDC, 4-20 mA sourcing and 4-20 mA sinking
Switches: Two, configurable as either sourcing (PNP) or sinking (NPN)
All configurable to the application’s needs

PLUS EVERY ToughSonic Ultrasonic Sensor has serial data for SenixVIEW setup or user application:

Choose RS-232 or RS-485 by sensor part number
RS-485 recommended unless RS-232 is required
Multi-sensor Modbus RS-485 networks
Serial data-only models are also available

Connected. SenixVIEW Software

SenixVIEW is included at no charge, runs on a Windows PC and connects to sensors via a serial data port. Our Setup Kits provide everything needed to connect through a USB port, including power supply, sensor-PC interface and cables. SenixVIEW is not required but adds powerful configuration, test and management capability.

View sensor measurements graphically in several different ways
Over 60 user-adjustable parameters
Built-in data logging, graphing, exporting and statistics facilities
Save & retrieve setups for maintenance and sensor cloning

Sensor Adjustments Give You More Control

Analogs: Slope, distance endpoints, analog value limits
Switches: Setpoints, hysteresis /window features, time delays
All Outputs: Power-on, loss of echo, loss of SYNC responses
Serial Data: Communications and SYNC modes and functions
Measurements: Temperature compensation, sensitivity, data filters, measure rate, gain settings and data processing filters
Adjustments: Stored in sensor memory even when power is off

ToughSonic CHEM 12 Variations

ToughSonic CHEM 10
Top or Bottom Mounted

Manual
Data Sheet
Upgrading to a CHEM 14 *
Arkema Kynar Chemical Resistance Chart
3D Models

* The CHEM 14 is recommended for new applications.

Request a Quote

Part No.	Outputs
LVL-100-485	5 + RS-485
LVL-100-485A	RS-485 only *
LVL-100-232	5 + RS-232
LVL-100-232A	RS-232 only *

* Serial data only models have a 4-wire cable

Specifications

Maximum Range	10 feet (3.00 meters)
Optimum Range	< 4 in. to 80 in (100 mm to 2 meters)
Deadband	Typ. < 4 in (0-100 mm)
Temperature	-40° to 158° F (-40° to 70° C)
Humidity	0 to 100% operating
Protection	NEMA-4X, NEMA 6P, IP68
Transducer	Chemically isolated piezoelectric
Compensation	Temperature compensated SenixVIEW selected options
Resolution	Serial data: 0.0034 in. (0.086 mm) Analog steps: 4099 (0-10 VDC), 3279 (4-20 mA)
Repeatability	Nominal 0.2% of range @ constant temp. Affected by target, distance, environment
Update Rate	10 Hz (100 ms), SenixVIEW adjustable; affected by SenixVIEW filter selections

*Specifications are subject to change without notice.

Outputs

Voltage Output	0-10, 0-5 VDC or SenixVIEW customized Maximum output current 10 mA
Current Loops (x 2)	Two 4-20 mA current loops: Current sourcing and current sinking Max loop resistance 450 ohms each SenixVIEW customized Both share calibration parameters
Switches (x 2)	Two switches, SenixVIEW customized 150 mA max @ 40 VDC max SenixVIEW selected as sinking (NPN) or sourcing (PNP) Adjustable setpoint, polarity, hysteresis, ON timing, OFF timing
Serial Data Interface	Modbus & streaming protocols 9600-115200 baud (configurable) 8 data bits, 1 stop, no parity RS-485 permits multi-sensor networks Part number determines interface

Mechanical

Housing	Injection moulded, chemically resistant Polyvinylidene fluoride (PVDF) Also known as Kynar, a registered tradename of Arkema Inc.
Mounting	Top mount: 1-inch Parallel Bottom: 1-1/2 in. NPT
Cable	Potted into sensor, pigtail termination 6.5 feet (2 meters), PUR jacketed Custom lengths available Standard models: 9-wire shielded + drain Serial data-only models: 4-wire + drain
Weight	21.2 oz. (0.60 kg) Weight includes 6.5 ft (2 meter) cable