Meet the ToughSonic CHEM 10 Level Sensor
The ToughSonic CHEM 10 is designed for applications where corrosive liquids or gasses are present, but it is an excellent choice for benign environments as well. The maximum range of 10 feet (3 meters) is the shortest range model in the ToughSonic CHEM sensor family.
The ToughSonic CHEM 10 is sealed in a PVDF (Kynar®) housing. It is fully submersible, chemical resistant and shock resistant. It has a potted-in 9-wire cable that connects up to five simultaneous analog and/or switch outputs plus a serial interface. It is fully configurable with SenixVIEW configuration and analysis software.
Please see the full line of ToughSonic and ToughSonic CHEM sensors for alternative ranges, sizes and housing materials.
ToughSonic CHEM 10 Options
ToughSonic CHEM 10 Sensor Models
Models are differentiated by data connection type, typically used with SenixVIEW software. All models have the same analog and switch output functions and features.
Modbus RS-232 serial data interface
Modbus RS-485 serial data interface
- Custom SenixVIEW configurations can be designed and preloaded for your unique application.
- Alternative cable type, length, and connections are available.
- Metric or BSP upper threads are available.
Benefits of ToughSonic Ultrasonic Sensor Technology
ToughSonic CHEM 10 sensors are built Tough with:
- Chemically resistant PVDF housings.
- Sealed epoxy potting for IP68 immersion rating and shock resistance.
- Ruggedized piezoelectric ultrasonic transducer, potted in place.
- Hardened ToughSonic solid state internal electronics.
- UV resistant, 6.5 ft (2 m) potted-in 9-wire cable standard.
How can we help?
Our ToughSonic CHEM ultrasonic sensors offer extraordinary features and flexibility. If you need sensor capabilities that are not listed here, please contact us. We’ve been designing ultrasonic sensors since 1990. We can develop a sensor solution for you. Email: Customer.Service@Senix.com. Phone: +1 802 489 7300.
Enhanced Capabilities with SenixVIEW
Over 60 functionally organized sensor parameters
Large and small displays, chart, filtered & unfiltered
Measure statistics; log and replay data, view in Excel
Store and retrieve custom setups, describe setups
ToughSonic CHEM 10 Specifications
|Maximum Range||10 feet (3 meters)|
|Optimum Range||4 inches - 80 inches (102 millimeters - 2 meters)|
|Temperature||-40° to 158° F (-40° to 70° C)|
|Humidity||0 to 100% operating|
|Protection||NEMA-4X, NEMA 6P, IP68|
|Resolution||Digital: 0.0034 inches (0.086 millimeters) Analog: 4099 steps (0-10 VDC), 3279 steps (4-20 mA)|
|Repeatability||Nominal 0.2% of range @ constant temp. Affected by target, distance, environment|
|Update Rate||5 Hz (100 ms), SenixVIEW adjustable; affected by SenixVIEW filter selections|
|Voltage Output||0-10, 0-5 VDC or SenixVIEW customized; 10 mA max.|
|Current Loop #1||Current sourcing 4-20 mA or SenixVIEW customized, max. loop 450Ω|
|Current Loop #2||Current sinking 4-20 mA or SenixVIEW customized, max. loop 450Ω|
|Sinking Switch||150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication|
|Sourcing Switch||150 mA max. @ input voltage, teachable set point & polarity, fault indication|
|RS-232, RS-485||Modbus protocol, 9600-115200 baud (selectable), 8 data bits, 1 stop, no parity|
|SYNC Feature||Permits up to 32 sensors to operate in close proximity without interference|
|Mounting||1.5 inch NPT/BSP Universal lower thread. 1 inch NPT upper thread|
|Attached Cable||6.5 feet (2 meters)|
|Total Weight||22.6 oz. (0.64 kg)|
Specifications are subject to change without notice.